Water & weather proof for outdoor projects, permanent, flexible, dries crystal clear, & will not bond to skin. Convenient narrow tip for easier use. Made in USA.
Always test on scrap materials first to ensure compatibility.
Cover work areas well to prevent surface damage.
Surfaces must be clean, dry and free from oil and grease. Apply to only one surface. To speed up drying, slightly pull glued surfaces apart and reposition. Repeat 3-5 times. For heavy loads, allow bonded surfaces to dry 24 hours.
Smooth surface plastics may require light sanding to help adhesion. Avoid applying excessive glue; a small amount of Quick Grip will go a long way. Quick Grip can be thinned and cleaned while wet with acetone.
Use in a well-ventilated area and follow all safety suggestions.
Not for use on rigid foams; use Beacon’s Hold the Foam instead. Store in a cool, dry place. Avoid direct sunlight.